A wood finish that stains fills, seals, protects, and beautifies all in one coat.
See available color choices below.
Apply to furniture, paneling, antiques, floors, doors, woodwork, picture frames, cutting boards, gun stocks and exterior woodwork.
250 Sq. Ft. per gallon on the first coat.
300-350 Sq. Ft. per gallon on the second coat.
Apply Velvit Oil to the wood surfaces, leave it penetrate 30 to 45 minutes. If it starts to dry out, apply more Velvit Oil, but keep the surface wet at least 30 minutes. Once it has penetrated for at least 30 minutes, start to wet sand using 320 to 400 grit wet/dry sandpaper. The sanding action creates a paste that fills the pores of the wood. Take a soft cloth and wipe off the excess. Leave it dry 24 hours. Nothing else need be applied over it.
Only pure Lemon Oil is recommended for polishing. Silicone or wax oils make wood susceptible to water spotting and are affected by ultraviolet light causing darkening of finish with age.
CAUTION: COMBUSTIBLE! Use with adequate ventilation. If swallowed DO NOT induce vomiting, CALL A PHYSICIAN IMMEDIATELY!
CONTAINS PETROLEUM DISTILLATES. Avoid prolonged contact with skin. Avoid prolonged breathing of vapor. KEEP OUT OF REACH OF CHILDREN!
CAUTION:::Wipe off rags & paper towels are combustible Store in a sealed metal container. Dispose properly.